CBT Motorcycle Course For Novice Riders
A1 permits you to ride a scooter or small motorcycle, and also take a passenger on a pillion if you are 17 or older.
A two day course without any tests. This is a great first introduction to riding. It focuses on re-learning the most important components of a bicycle, as well as slow exercises for controlling.
Compulsory basic training (CBT)
CBT is the first course that any beginner rider should take. It typically takes a full day to complete. If you are able to achieve an acceptable level by the end of the course, your instructor will give you the DL196 certificate of completion.
In this course, you will learn the basics of operating on a motorcycle. You will be supervised by a knowledgeable instructor throughout the day. You'll also receive a short theory session which will teach you about the code of conduct and road rules and safe and safe lane positioning. You'll learn how to inspect and maintain your bike, and also how to carry a pillion (if appropriate).
The next part of the CBT is practical riding on the spot. Your instructor will outline an area of safety for you to test your skills, starting with a slow pace and then performing basic safety checks, moving off and stopping the motorbike and braking safely. Your trainer will be in radio contact with you during this time and will assist you until they feel confident that you can perform the exercises at a safe level.
This portion of the course introduces you the various kinds and types of roads and traffic. You'll learn to safely navigate roundabouts, traffic lights and one-way streets. You'll also learn the basics of cornering and how to carry out figure of 8 and emergency stops.
This is the final portion of the CBT, and your instructor will take you on a variety of roads. You'll be in contact with your instructor, who will monitor your progress throughout the course. You will receive the CBT DL196 certificate if you successfully demonstrate that you are able to operate a motorbike and manage various road situations.
CBT has been around for a time, but it is still a crucial aspect of motorcycling. We continue to see improvement in the number of accidents since the introduction of CBT. It is important that you choose a motorcycle training school that provides extensive CBT courses to ensure you are well-prepared and ready for your journey into the world of motorbikes on two wheels.
Module 1 Theory Test
The first step in getting an A1 license is passing the motorcycle test. The test lasts 40 minutes that tests your knowledge of traffic laws, road rules signs, and general safety. To maximize your chances of passing, it's recommended to read the Highway Code prior to taking this test.
The day following your CBT you will start your first module of training. You will be riding a bicycle that is suitable to your particular category of licence. If you're aiming for an A1, this will be an A1 Honda Monkey. The course will provide plenty of off-road balance and control practice to prepare you for the maneuvers in the module 1 test. You will also visit an DVSA test centre to get familiar with the marking procedures and procedures associated with each test.
At the end of your training, you'll be able to pass your module 1 test at a DVSA-approved motorcycle test center. You'll need to bring your CBT certificate along with a valid passport or driving licence.
After having passed Module 1 After passing Module 1, you will move on to the Module 2 test which is conducted on the road. The examiner will take you on a short trip around the local area, with approximately 35 minutes of solo riding for you to complete. The examiner is testing your ability of multitasking while following road signs and will require to see you demonstrate excellent driving abilities.
After completing Module 1 and Module 2 you will be able to enjoy the freedom that is provided by an A1 light licence. This will allow for you to use bikes up to 125cc, without the requirement of a learner's licence. You will also not be required to display your L plates. A1 licenses also permit you to ride with a companion and you don't need to repeat the CBT every 2 years. This is a great alternative for those who want to share the thrill of motorcycling. The next step up from an A1 licence is the A license that is not restricted and requires a full driving licence.
Module 2: Practical Test
Module 2 is the practical portion of your motorcycle license. After passing Module 1 and the theory test, you are ready to take Module 2. This test grants you an A1 license which allows you to ride motorcycles up to 125cc with a maximum power of 11 BHP. You can also carry a passenger and ride on motorways.
The Mod 2 test is a practical riding test with about 10 minutes of independent riding. The examiner will follow you along a predetermined route that has varying traffic and road conditions. The route includes busy junctions as well as roundabouts and dual carriageways. You'll need to be able to navigate in various conditions.
Module 2 will test your ability to observe the road ahead, anticipate traffic and navigate roads. This is crucial as it will enable you to make decisions on the fly when out on the open road. For instance, if you're driving along the road and you notice a car pulling out towards your path, you will need to be able to react quickly.
You'll also need to demonstrate good slow control for example, being capable of pulling away smoothly, stop with confidence and maintain speed. You must be able to demonstrate good braking, and execute a controlled U turn when necessary.
You'll also be tested in regards to your ability to signal and change gear. You'll be asked to signal prior to overtaking another vehicle or exiting a road, as well as changing gears if needed.
If you've passed both the parts of the Module 2 test, you'll receive your A1 license via mail. You'll then be able ride your new bike through the countryside or commute to work in fashion and comfort. Whether you choose to ride an electric supermoto or scooter or a supermoto, your new A1 licence will be your ticket to freedom adventure, excitement and adventure.
Licensing
This course is for those who have completed Module 1 & 2 and wish to enhance their riding skills and bond with their bike. It typically involves more advanced exercises & training such as looking through your turns and leaning to steer the bike at higher speeds. It also covers hazard avoidance and high speed cornering, as well as brakes and stopping at high speeds. You will be out on the road for 6 hours with a Ride instructor and you can choose your own bike.
This is a great option for drivers who aren't sure if a full license is what they really would like. jazda skuterem includes the Module 1 and 2 tests as well as the off-road skills required to obtain your Cat A license.
You will start off on an incredibly small bike to familiarize yourself with your riding posture and balance, before moving up to the size of the bike that is required for your particular category of licence; typically a 500cc motorcycle. You will be riding your own bike for this class, and you can wear your own helmet or can purchase one through us.
The BRC is a 5-day program that provides the knowledge and experience you require to become a licensed motorcyclist in the state of Tennessee. If you pass the BRC can allow you to skip the written and driving tests at the TN Department of Motor Vehicles.
You must be 16 years old to take the Basic RiderCourse. If you are under 18, you will require your guardian or parent to sign the Covid Release and Waiver of Indemnification form (click here) and the Motorcycle Safety Program Parent/Guardian Agreement. Your parent or guardian will also need to complete the MSF ecourse before attending your BRC course.